mobile lcd freeze separator machine packing:
Shipped in 5 days after payment
BAKU hot selling automatic mobile lcd touch screen glass freeze separator machine
LCD Freezing Separator Machine
40 to 60s
1.Using the latest freeze separation technology, high cost performance, less investment return fast.
2.Using compressor technology, really up to minus 130 degrees, to meet the temperature requirements of the LCD separation,suitable for large quantities of separation and processing for the repair shop, repair and processing center and the use in maintenance factory.
3.After the compressor reaches the set temperature, the compressor stops working automatically without power consumption.
4.The device base is installed with a universal sliding wheel, which is convenient for transportation and adjustment of the height difference.
5.The lid is sealed with a fully closed refrigerator technology, to maintain the temperature of the constant temperature and rapid cooling.
Steps 1. Insert the plug well and open the machine power,then adjust controller's temperature to -130 °C.
Steps 2. Waiting for temperature from -125 to -130 ° C (the normal operation will be not affected by the temperature according to measurement ), need to wear work gloves well,and then put the split screen screen in the freezing zone equably.
Steps 3. Waiting for 1 to 2 minutes to open the machine cover after closing the machine cover.At that time, the screen operation can be disassembled .
1. )Don't start the split screen operation until the normal temperature from -125 to -130 ° C.
2. )Don't need to put it in the machine case for freezing overtime,the screen is placed down, to avoid causing the screen backlight into water damage.
3. )Must take work gloves into operation inside the case to protect hands.
4.) When separating the curved screen, the separation risk caused by the temperature difference between the two sides of the curved surface screen need to pay more attention.
5. )After LCD separating , pls put the glue side upward to avoid stick to the surface you put after the temperature return to the normal.