One PCS / One Individual Packaging (Weight: 0.38 KG Size: 11.4*5.3*6.2 CM )
More Logistics, Please Contact
Multifunctional Mini Battery Tester for Iphone for ipad
Battery Test Board : 1> 8G , 8P , X 2> Watch Series 1 , Watch Series 2 3> iPad Air 1 2 , iPad 3 4 , MINI 1 4 , MINI 2 3 4> 7G / 7P , SE / 6P / 6S / SP , 6G , 5S , 5G , 4S ,4G activation board: 7G / 7P, SE / 6P / 6S / 6SP, 6G, 5S / 5C, 5G, 4S, 4G
Automatically read the battery information, the battery a key clear, check the battery cycle, the battery a key activation, support Apple full range of battery charging, discharge test; battery design capacity detection, battery actual capacity detection, full capacity test, battery Efficiency testing; battery cell manufacturer testing, production date detection, battery serial number, chip type detection, battery current, battery temperature detection and so on.
Procedures Before Testing
Step1:Push down the cover button to open the top board of battery holder
Step2:Hold on the probe track board button and rotary the probe track board to correspond to that side of the battery contacts
Step3:Move the probe handles for correspond to the battery contacts
Step4:Place the battery on the baseboard,make sure that the metal contact to the probe
Step5:hold on the battery and press down the top board of battery holder
Step6:Ensure that the battery holder has been clamping the battery
Step7:Connect the adapter and the analyzer by the small USB cable
Step8:Connect the analyzer to the power supply
Unable to power on
DC 13.5V OR 18V power supply is not well conected or no power supply is connected
Check power supply connection of change another socket.
1.Interfered by stong magnetic filed.
2.Interfered by other frequencies.
3.Disconnection of DC 13.5V OR 18V power supply
1.Disconnect the DC power supply.
2.Reconnect the DC power supply.
3.Replace with another original DC power supply.
The letters "Err“appearing on the LCD and the buzzer sounds
1.The adaptor is not placed properly into the bay or the probes fail to contact well with the metals of the battery.
2.The was broken down.
1.Place the another properly into the bay or readjust the probes to contact well with the metals of the battery
2.Dispose the battery properly
The lines "0V"and "Not Pass" appearing on the LCD when the test begins to run